Posted: December 14, 2020
Going to an established motorcycle dealership does not guarantee their mechanics are honest and trustworthy. Being in business over 10 years we’ve seen just about everything. Shops charging anywhere from $250 to $1500 for the same installation! On newer Harley’s they’re using the Can Bus system. So unlike the old bikes where you have to pull a thick pack of wires through, the Can Bus just pulls a few on each side. When it comes to aftermarket custom installations, it’s not uncommon in our industry to see such shady individuals falsely claim defects or poor quality exists, suggesting that the bars have jagged edges which took a significant amount of time to clean out and perhaps replacing wiring so they can (1) charge customers for additional labor and / or (2) try to convince that customer to switch to a like product they sell.
Our manufacturing specifically addresses this step. We intentionally smooth out any and all such jagged edges specifically to ensure wiring is unaffected. Our bars cannot go to the next step in manufacturing this step is completed. Almost always the mechanic will not show a customer the alleged jagged edges in advance. They only mention it after they’ve supposedly removed them after a laborious, time consuming process. Furthermore, there is no tool that can reach such jagged edges to smooth them out once the center and hand controls have been TIG welded. A file cannot enter the bottom or top holes and make the angle to clean the inside edges. Here’s how we clean the insides of the bars prior to welding them… https://www.instagram.com/p/BpVO7fjB4Pa/
For our customers who choose to install on their own we offer some tips I’ll share with you. Our customers who followed our suggestions, circled back with us after t
I’m writing this to share my series of unfortunate experiences upon hiring Luna Metal Buildings and Concrete. I say experiences (plural) because they failed to disclose pertinent information, conduct themselves honestly and deliver the product I should have received. I’ll start from the beginning…
I contacted Luna Metal Buildings and Concrete with the intention of purchasing a 30x31 metal building. I spoke with Sofia, their representative. She informed me I needed to provide them with an initial cash deposit or cashers check to get the ball rolling. Once they received this initial payment they’d come out and pour the concrete within 2 to 3 weeks. Following the concrete installation, the building would be installed within an additional 2 to 3 weeks. The balance would be due at this point in time. She asked me if I was going to pull a permit and I differed to her asking if I needed one. Her response was simply I didn’t need a permit. Knowing what I know now, Sofia should have said is if this new building was being installed “as is” on farm exempt property, then no permit would be required. HOWEVER if electric was going to be run to the building, then a permit would in fact be required. Sofia also neglected to mention their buildings are NOT up to code when a permit is not pulled. In short, you basically get an expensive shed. When a permit is pulled, to meet code, Luna installs additional strap-downs and support beams. I now regret accepting Sofia’s incorrect answers which I wish I researched further on my own. It’s unfortunate I couldn’t rely on receiving accurate information from the company I hired and entrusted.
Moving forward… After I provided them my initial payment, not 2-3 weeks later but 5 weeks later they called and said they were coming out to pour the concrete and asked if I needed any grading. I said it was pretty flat and sent them a photo. They a
It is my personal opinion and experience that Kabbage funding is one of the worst companies out there and they do not deserve your hard-earned money. There is allot of small business funding companies out there, so I suggest that use a different one.
During this covid-19 crisis Amazon lending suspended all payments and interest on loans for 30 days to help People and their Business out. PayPal has 2 different funding programs loan Builder and PayPal working Capital They also thought about their customers and suspended all payments and interest for 30 days.
What did Kabbage funding do to take care of their customers? They froze customers credit line without any warning and still charged customers Interest. I paid mine off and I will never use this Crap company again That obviously does not care about their customers at all.
Kabbage funding is the worst!
When the 2019 Indian Scout showed up in the Ultimate Motorcycling garage, we didn’t immediately think about stoking the Indian vs. Harley-Davidson rivalry—it took about 10 seconds to go there.
So, we looked to the Harley-Davidson Sportster line for a challenger, and the 2019 Harley-Davidson Forty-Eight Special stood out as the motorcycle to take on the 2019 Indian Scout.
Posted: June 02, 2019
Harley-Davidson Inc. has appointed Neil Grimmer to the newly created position of brand president with the responsibility of growing riders globally, the company has announced. Reporting directly to President and Chief Executive Matt Levatich, Grimmer is responsible for all aspects of the Harley-Davidson brand including product planning, marketing, retail, apparel, and communications.