HI/LO SPIKE BEND CUSTOM HANDLEBARS FOR VICTORY CROSS COUNTRY
- HI/LO SPIKE BEND CUSTOM HANDLEBARS FOR VICTORY CROSS COUNTRY
- These bars can be used at a low profile height or can be raised to give your bike that custom ape hanger feel
- These are not pre drilled because of victory's cables are on the outside
- But if you want to do internal wiring, we can pre drill for no extra charge
- MADE IN THE USA!
- THESE COME POWDER COAT GLOSSY OR SATIN BLACK •
PLEASE LET US KNOW WHAT FINISH YOU WOULD LIKE
- 1 1/4" TUBING WITH A DOM .120 WALL THICKNESS.
- THESE ARE 100% TIG WELDED.
- THEY ARE FMB CHOPPERS OWN DESIGN AND THERE A GREAT FEEL AND LOOK
- 34-1/2" BAR TIP TO TIP
- 17" FROM MOUNTING BASE TO TOP OF HAND CONTROL AREA
- 10-1/2" Side to side inside
- 113" outside to outside
- 8-1/2" OF 1" TUBING FOR CONTROLS
- 3 days to ship raw, 5-6 days to ship powder coat
By re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cables
But we still suggest buying victory's extended brake cable
On the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel